TySOM  05_TySOM_icon_32

EMBEDDED PROTOTYPING BOARDS / FPGA / PROTO


 

TySOM is a family of development boards that feature Xilinx Zynq all programmable modules, combining an FPGA and ARM Cortex Processor. Used by embedded designers for applications such as IOT, Automotive, Industrial automation and High Frequency Trading.

 

TySOM boards use either Zynq 7000 or Zynq UltraScale+ devices and include memories and various communication and multimedia interfaces. In addition to this, Aldec also offer a range of TySOM FMC and BPX daughter cards for peripheral expansion. Reference designs are provided for applications such as IoT, ADAS, 4K UltraHD imaging and Robotics, as well as a complete reference design containing the software (Linux) and hardware blocks required to support the peripherals.

 

ZYNQ ULTRASCALE+ MPSOC BOARDS
 
tysom_3_smallTySOM-3
 
TySOM-3-ZU7 is a compact prototyping board containing Zynq UltraScale+ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing.  Read more..
 
 
 
 
 
 
 
 
TySOM-3A_sm_topTySOM-3A
 
TySOM-3A-ZU19EG is a compact SoC prototyping board featuring Zynq UltraScale+ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for SoC prototyping solution, IP verification, graphics, video, packet processing and early software development. Read more..
 
 
 
 
 

ZYNC-7000 BOARDS 

tysom_2_smallTySOM-2

TySOM-2 is a compact prototyping board containing Zynq-7000 module. It is designed to assure maximum flexibility in selecting peripherals due to leveraging large Zynq chip package and providing two FMC-HPC connectors enabling use of expansion daughter cards. Standard peripherals like DDR3 RAM, USB and HDMI required by ARM CPU subsystem are contained in that board. Read more..

 

 

 

 

 

tysom_2a_smallTySOM-2A

TySOM-2A is a compact prototyping board similar to TySOM-2 but featuring a smaller Zynq-7000 module and providing one FMC-HPC connector. Such design assures flexibility in selecting peripherals while providing cost optimised and smaller form factor board well suited for many embedded designs and applications. Read more..

 

 

 

 

tysom_1_smallTySOM-1

TySOM-1 is a compact prototyping board containing the mid size Xilinx Zynq-7000 All Programmable FPGA with dual-core ARM Cortex A9 and rich selection of peripherals to make a complete and universal physical prototyping platform for a broad range of embedded designs and IoT applications. Read more..

 

tysom_1a_board_smallTySOM-1A

TySOM-1A is a compact board containing Xilinx Zynq-XC7Z010 All Programmable device with dual-core ARM Cortex A9 and a selection of peripherals to provide a complete prototyping platform for embedded system designs and IoT applications. Read more..

 

 

FMC DAUGHTER CARDS

fmc_adas_smallFMC - ADAS

FMC-ADAS daughter card was designed to enable prototyping and evaluation of Automotive and Advanced Driver Assistance Systems (ADAS) designs with TySOM and HES boards. It extends the base functionality of a given FPGA board by providing RADAR, LIDAR and car camera interfaces and peripherals. Read more..

 

 

 

 

fmc_intf_smallFMC-INTF

FMC-INTF card provides a good selection of commonly used peripherals like PCI Express, optical fibre QSFP+, Gigabit Ethernet, USB and more. It extends functionality of main FPGA boards in case given interfaces are not available natively or if they are needed to be connected to other FPGA than native ones. Read more..

 

 

fmc_iot_smallFMC-IOT

FMC-IOT card provides a set of peripherals and interfaces commonly used in embedded designs of Internet-of-Things (IoT) applications. There are various wireless communication standards used in such designs and this board enables prototyping with any of the Wi-Fi, Bluetooth, ZigBee, Sub-GHz RF devices as well as wired Ethernet networking. Read more..

 

 

fmc_vision_smallFMC-VISION

FMC-VISION card provides a set of multimedia interfaces for display panels, monitors, and cameras which are widespread across different kinds of designs like embedded vision, graphic & video processors and the like. There is also an audio-codec and USB 3.0 on this daughter card that make it well-fitted for all kinds of multimedia designs prototyping. Read more..

 

 

 

 

fmc_net_smallFMC-NET

FMC-NET card was designed to enable prototyping and evaluation of various networking designs by providing commonly used networking peripherals like industrial grade Gigabit Ethernet, wireless WiFi/Bluetooth, optical fibre QSFP+ and other auxiliary connectors. Read more..

 

 

fmc_qsfp_rv_topFMC-QSFP

FMC-QSFP card provides QSFP+ and SFP+ extension to FPGA prototyping boards with FMC connectors. It can be used in networking applications that require high bandwidth connection to external environments for example implementation of optical fibre transceivers. Read more..

 

 

fmc_industry_smallFMC-INDUSTRIAL

FMC-INDUSTRIAL card was designed to enable prototyping and evaluation of industrial applications by providing selection of communication interfaces often used in the industry where QoS and immunity to rugged conditions is paramount. The board contains isolated RS485, RS232 and CAN controller as well as auxiliary USB 3.0 and PMOD connector. Read more..

 

 

 

BPX DAUGHTER CARDS

hes7db_usb_eth_smallHES7DB-USB-ETH

HES7DB-USB-ETH is a small form factor expansion card that uses one segment of BPX connector on HES main boards. It provides Gigabit ethernet and USB peripherals for networking and communication designs. Additionally it provides a HDMI PHY and port for connecting displays. Read more..

 

 

 

hes7db_fmc_smallHES7DB-FMC

HES7DB-FMC is an adaptor daughter card from BPX to FMC connectors. Additionally it provides two QSFP+ connectors for high speed serial links used in optical/fibre communication. Read more..

 

hes7db_soc_smallHES7DB-SoC

HES7DB-SoC daughter card extends capabilities of HES boards with the ARM Cortex A9 dual-core CPU in a programmable Xilinx Zynq-7000 device. It also provides a set of peripherals commonly used in SoC designs such as USB, Ethernet, Wi-Fi, HDMI and more. Read more..

 

 

 


 

adam Adam Wilson, Sales, FirstEDA

 

“Through Aldec's range of TySOM development boards, we can supply an off-the-shelf solution for embedded designers developing complex systems with custom RTL and embedded applications. Daughter cards extend the TySOM boards, providing additional devices and peripherals. Because Aldec use non-proprietary connectors like FMC or BPX, these daughter cards can be reused across different hardware platforms..”

 

Contact us for more information and pricing.

CONTACT US